Company Info





Home > Gold Prospecting Equipment
Choose a sub category:
Pro Gold Trommel Zig Zag High Banker
Pro River Sluice Pro Inline Screen
Custom Work
Sort By:
Page of 1
Pro Inline Screen
Our Price: $75.00

The Pro Inline Screen captures the particles and vegetation in the water you are pumping to your machine and prevents them from plugging the holes in the spray bars of your equipment.

Set Up:
Connect a discharge hose from the pump to the inlet end of the Inline Screen.  The arrows on the body indicate the water flow direction. Connect the second discharge hose to the outlet end of the Inline Screen, using additional hose as required to connect to the equipment you are running.
The diagram below shows a typical connection sequence using a 2” pump and 1 ½” discharge hose to the desired prospecting equipment.

Clean Up:
Shut down the pump. Disconnect the Pro Inline Screen from the hoses. Unscrew the Pro Inline Screen at the threaded coupling. Rinse the screen and the tube sections in the clean water source you are pumping from. Screw the Pro Inline Screen back together at the threaded coupling.
Reconnect your hoses, start the pump and, and resume processing your material.
Pro River Sluice Box
Our Price: $178.00

SET UP:
Place the river sluice into small river or stream where the water is flowing. Settle sluice half way to bottom of stream and allow for the correct drop of angle. The angle should be approximately 1″ of drop for each foot of sluice box. The flow of water should be 1/2″ of water over the riffles.


HOW IT WORKS:
Place classified material by small shovel or scoops in upper part of the funnel. Washed material will flow down and into the sluice box and over the riffles. Scoop in small amounts of material every 20-25 seconds, being careful not to overload the riffles. A 5 gallon bucket of material can be processed about every 15-20 minutes.
Pro Zig Zag Highbanker
Our Price: $810.00

Material is placed into the upper hopper, where the spray bars wash the material. The material then drops down onto the
grizzly area. The classified material will drop down and the washed rocks will fall out. From there the washed material drops into the top of the sluice box and gets washed through the riffles.

Processing a five gallon bucket should take about 4-5 minutes.

By washing the material for a longer time, our unique zig zag design helps you capture more gold!
Pro Gold Trommel - 10"
Our Price: $2,700.00

  • Durable, built to take a beating. Literally. Throw, dump, chunk, shovel rocks straight into the barrel without worry about breaking the hopper. This machine is built to LAST. Easily loaded into pickup truck by 1-2 people, weighs only 190 lbs.
  • Portable, convenient handle at the end of rock chute allows for wheel barrel type mobility. 
  • Affordable, priced almost as low as some high-bankers on the market.
  • Made in the USA


HOW IT WORKS:

Material is placed into the hopper, where the first spray zone washes the material before entering the rotating drum. The second spray zone, inside the rotating drum, washes the material as it tumbles. The third spray zone, outside the rotating drum, keeps the drum clean and helps wash the material.This unique design ensures the material is washed from multiple angles as the drum rotates, allowing a five gallon bucket of material to be processed in 2-3 minutes.

As the material is washed and tumbled, the smaller pieces and dirt fall through the drum’s heavy steel screen into the funnel assembly. From there they are directed into the top end of the sluice and get washed through the riffles.The larger material still in the rotating drum, is tumbled and washed for the entire length of the drum and dropped out the end onto the trough.
Pro Gold Trommel - 14"
Our Price: $4,200.00

  • Durable, built to take a beating. Literally. Throw, dump, chunk, shovel rocks straight into the barrel without worry about breaking the hopper. This machine is built to LAST. Easily loaded into pickup truck by 2 people, weighs only 265 lbs.
  • Portable, convenient handle at the end of rock chute allows for wheel barrel type mobility. 
  • Affordable, priced almost as low as some high-bankers on the market.
  • Made in the USA


HOW IT WORKS:

Material is placed into the hopper, where the first spray zone washes the material before entering the rotating drum. The second spray zone, inside the rotating drum, washes the material as it tumbles. The third spray zone, outside the rotating drum, keeps the drum clean and helps wash the material.This unique design ensures the material is washed from multiple angles as the drum rotates, allowing a five gallon bucket of material to be processed in 4-5 minutes.

As the material is washed and tumbled, the smaller pieces and dirt fall through the drum’s heavy steel screen into the funnel assembly. From there they are directed into the top end of the sluice and get washed through the riffles.The larger material still in the rotating drum, is tumbled and washed for the entire length of the drum and dropped out the end onto the trough.